Fold-Form MAXX: Insulated Concrete Forms Specificationsffordable.

Fold-Form has taken ICF's to the MAXX. This ICF Block system is pre-assembled with folding plastic spacer ties and continuous furring strips every 6". 30% to 50% lower shipping/storage costs and a pre-molded corner block gives installers more value for their ICF dollar. Available nationwide through Owens Corning suppliers and a network of regional outlets. An excellent choice for residential, commercial, institutional or governmental projects.

SPECIFICATIONS

General Specifications	Fold-Form MAXX
Overall Dimension	12" x 48"
Form Wall Thickness, per side	2 inches
Number of Ties	8
Attachment Rails	Continuous
Pull Out Strength of Tie	175lbs.
In-Wall Bracing (Optional)	Horizontal every 4'
Concrete Core Sizes	6" , 8"
R-Value (Form only by test)	R-18
R-Value (Form and 8" Concrete Wall by Calculation	R-23
Fire Rating	6 inch - 3 Hours 8 inch - 4 Hours
STC (Sound Transmission Class)	53

EPS PROPERTIES TABLE

Determining Concrete Volume:

Height (feet) X Length (feet) X Thickness (inches) X .0031 = Cubic Yards

Finishing Techniques:

Interior: Drywall applied directly over insulation surface, attached with standard drywall screws into polypropylene forming ties.

Exterior: Synthetic masonry, damproofing or waterproofing applied directly onto insulation surface per manufacturer. Prefabricated finishes are attached mechanically into continuous polypropylene forming ties with fasteners which are appropriate for exterior use.

In buildings where people normally work or reside, polystyrene concrete forms must be fully protected from the interior of the building by fire resistant material such as 1/2 inch gypsum board (drywall) or the equivalent.

LITEFORM TECHNOLOGIES • 1950 WEST 29TH STREET • SOUTH SIOUX CITY, NE. 68776 USA • 1-800-551-3313